Advertisement
Step-by-Step Build Guide (cont'd)
Step 2.6 Glue Canopy Parts Together
2.6.1 Glue parts Canopy 1 and Canopy 2 together, which include built-in alignment
aids. Use qty. 3 , 3mm diameter x 10mm long dowel pins cut from scrap wood
dowels or carbon fiber rods to align Canopy 3 to Canopy 2 and glue together.
You may need to clear out the dowel pin holes with a 3mm or 1/8" drill bit.
3D
Aeroventures
Canopy 1
www.3daeroventures.com
w�w�3�A�r�v�n�u�e�.�o�
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
Canopy 2
Canopy 3
- 2� -
Advertisement
