Advertisement
Step-by-Step Build Guide (cont'd)
Step 6. Painting/Finishing (Optional)
Tools and Materials Needed:
- 150 Grit, 220 Grit, 400 Grit Sandpaper
- 1500 or 2000 Grit Sandpaper
- Isopropyl Alcohol/Rubbing Alcohol
- Acrylic Spray Paint Colors of your choice. Or use an airbrush system.
- Pinstripe tape, masking tape, and plastic wrap for masking off parts
- Flexible steel wire for hanging parts while painting and drying
- Paper towels or lint free cloth
Step 6.1 Sanding
6.1.1 Sand all of the parts with 150 grit sandpaper to remove the larger
imperfections and break down the layer lines. Then sand the parts with
220 grit, followed by 400 grit sandpaper to further smooth the parts.
6.1.2 Lightly wipe down all parts with isopropyl alcohol to remove any residual
dust from sanding.
3D
Aeroventures
www.3daeroventures.com
w�w�3�A�r�v�n�u�e�.�o�
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 4� -
Advertisement
