Advertisement
Step-by-Step Build Guide (cont'd)
Step 2.5 Glue Fuselage and Fuse Tray Parts Together (cont'd)
2.5.1 Starting with Fuse 1, apply CA adhesive to the rails where Fuse Tray 1 slides
into place.
the firewall and wipe off any residual glue from the Fuse 1 surface that
mates with Fuse 2 before applying CA Accelerator to secure the bond.
3D
Aeroventures
Ensure Fuse Tray 1 is fully seated into place in the rail behind
www.3daeroventures.com
w�w�3�A�r�v�n�u�e�.�o�
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
Ensure the tray is fully seated into
the rail behind the firewall
before applying accelerator
The Tray slides into these three rails
- 1� -
Advertisement
