Table of Contents
Advertisement
6
Using the product
6.1.
Performing settings
6.1.1.
Assigning the right function key
The right function key can have a function from the
assigned to it. The menu
key and is available in many different menus. This assignment is
only valid for the currently opened menu / the opened function.
✓ A menu / function is opened in which the
displayed on the left function key.
1. Press
2. Select option: [▲], [▼].
Depending on the menu / function from which the
was opened, the following functions are available.
3. Assign the selected function to the right function key: Press
[Config.
6.1.2.
Instrument settings
Calling up a function:
>
[
6.1.2.1.
Readings display
The parameters / units and the display representation (number of
readings displayed per display page) can be set.
The settings are only valid for the currently chosen measurement
type, which is indicated by the symbol in the info field.
Total overview of selectable parameters and units (available
selection depends on the chosen measurement type):
Display
FT
AT
ltemp
Pump
O2
[Options]
.
Key].
It is assumed that the contents of the chapter First steps
(see First steps, page 29) are known.
]
→
Device
Settings.
Parameter
Flue gas temperature
Combustion air temperature
Instrument temperature
Pumping capacity
Oxygen
Options
is accessed via the left function
6 Using the product
Options
menu
Options
menu is
Options
menu
39
Advertisement
Table of Contents
