Performing Settings - TESTO 0560 4160 Instruction Manual

5.4 Performing settings

1
To open configuration mode:
The instrument is switched on and is in
ü
measurement view. Hold, Max or Min are not
activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
You can leave configuration mode at any time. To
do so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in
configuration mode will be saved.
2
To set the area:
Configuration mode is opened, AREA is
ü
Set the cross-sectional area with
confirm with
3
To set Auto Off:
Configuration mode is opened, AutoOff is flashing.
ü
Select the desired option with
confirm with
· on: The measuring instrument switches off
automatically if no button is pressed for 10min
(Hold or Auto Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.
4
To set the unit of measurement:
Configuration mode is opened, UNIT is lit.
ü
With
1
(m/s, fpm) and confirm with
With
2
3
line (m /h, l/s, cfm) and confirm with
(for approx. 2s) until the display
.
:
/ set the required unit for the top line
/ set the required unit for the bottom
5. Operation 25
(for approx. 2s) until the
lit.
/
/ and
.
.
and
.