Signing In To The Phone; Testing The Phone; Changing The Order Of The Sign-In Method; Allowing Users To Display Phone # Or Ext # In Phone Screen - AudioCodes 405HD Administrator's Manual

Administrator's Manual
4.
Navigate to the folder in which you stored the delta configuration .cfg file, select it, and
then click Submit; the configuration file is loaded to the phone.
2.2.5.2

Signing In to the Phone

For instructions on how to sign in through the phone's screen, see the phone's User's

Manual.
For instructions on how to sign in through the Web interface, see Section 4.18.

2.2.5.3

Testing the Phone

You must test the phone to see if the newly configured settings match your requirements.
See the User's Manual for information on how to operate the phone's functions and
features.
2.2.5.4

Changing the Order of the Sign-In Method

Most enterprises prefer the 'PIN code' option to precede the 'Phone number' option as the
default method for signing in. In the default order, 'Phone number' precedes 'PIN code', but
administrators can change it.

To change the default method for signing in:
In the Configuration File (Management tab > Configuration File), change the

'lync/sign_in/method' parameter value to NUMBER_AND_PIN.
2.2.5.5

Allowing Users to Display Phone # or Ext # in Phone Screen

Using parameter 'lync/sign_in/line_type_display/ext', you can allow users to define whether
to display their telephone number or their extension number in the phone's screen. This is
only possible if the enterprise's Active Directory includes both. Default: 1 (extension
number).
2.2.5.6

Forcing Sign-in with PIN Code

Network administrators can force users to sign in with PIN code using Configuration File
parameter sign_in/pin_code_only. In this mode, the only sign-in option is with user
extension number and PIN code. Allowing only the basic PIN code option on the user's
phone helps avoid user mistakes and helps avoid storing the user password on the phone.

To force sign-in with PIN code using the Configuration File:
1. Open the Configuration File page in the Web interface (Management tab >
Manual Update > Configuration File).
2. Configure the parameter using the table below as reference.
Parameter
[sign_in/pin_code_only]
Version 3.0.1
2. Automatic Mass Provisioning of IP Phones using DHCP

Table 2-6: Forcing Sign-In with PIN Code

Determines which online sign-in method option must
be used.
[0] (Default) Allows sign-in with user credentials

and with user extension number and PIN code.
[1] Sign-in can only be with user extension

number and PIN code.
39
Description
400HD Series for Skype for Business