Table of Contents
Advertisement
With the "Automatic" mode the rear light automatically turns
on and off with the help of light and movement sensors. When
the bicycle stands still for a while, the light will automatically
turn off.
The rear light works on batteries. When the batteries are
almost empty, a red LED light on the top starts flashing. To
replace the batteries, follow the next steps.
1.
Dismantle the cover of the holder by pressing in the
lip at the bottom of the light.
2.
Replace the alkaline batteries.
(1,5 V - 1500 mA) and assemble the
cover.
Batteries cause environmental pollution.
Follow the local regulations during disposal.
Centrally Operated Lighting
The bike has been equipped with centrally operated
lighting, with the lighting being connected to the
electric system.
The lighting will turn on automatically when the electric
system is activated.
Adjust the angle of the headlight, so that the centre of
the light beam is aimed about ten metres in front of
the bike.
Version 21.01
1.
2.
10/35
Advertisement
Table of Contents
