Flashing light system
To use the flashing lights press the switch
[A] to the left or right.
To turn off the indicators, move the switch to
the centre position.
The lights work on a battery. To replace the
batteries, turn the screw on the cap and take the
orange cap [B] away. Then remove the PCB [C]
from the holder. You can now replace the battery
[D].
This is a 3-volt lithium battery, CR123A
Batteries cause environmental pollution.
Follow the local regulations during
disposal.
Version 21.01
[A]
[C
[D
]
[B
]
25/35