Before The First Use - Van Raam Balance User Manual

Position handlebars
You can tilt the handlebars. This influences the
distance from the handlebars to the upper body.
Determine your own most comfortable position
by using the bike.
To tilt the handlebars:
1. Slightly loosen the screws [A] and [B]
with an Allen key.
2. Put the handlebars in the desired
position and then tighten the screws
considerably.
Slightly loosen screw [C] with an Allen key, put the
3.
handlebars in the correct (horizontal) position and
then tighten the screw again.

Before the first use

Lighting
Normally, the lighting on your bike can be operated manually and set to different modes.
However, if your bike is equipped with the Silent Elektro system, your lighting will
automatically turn off when the electric system is activated. The controls of both the
manually operated and centrally operated lighting is explained below.
Version 21.01
3.
[C]
[A]
1.
2.
[B]
1.
8/35