Table of Contents
Advertisement
Manually operated headlight
The headlight has a button with three different modes: ON – ON [50%]
– OFF.
Adjust the angle of the headlight to its correct position, when the centre
of the light beam is about 10 metres in front of the bicycle.
The headlight is powered by batteries. When the batteries are nearly
empty, the LED light in the button of the headlight will turn red. Follow
the steps to change the batteries of the headlight.
1.
Open the headlight by pushing down the tab on the
housing and simultaneously pulling the front of the light
outward like shown.
2.
Change the two alkaline batteries (2x AA).
3.
Put the light back together by first pushing the top of
the light back into the housing and then pushing the
bottom of the light back over the tab of the housing.
You can only operate the light while your bike is standing still to avoid dangerous
situations and to avoid the chance of entrapment.
Manually operated rear light
The rear light has three options which you can choose
by pressing the button repeatedly: On-Auto-Off.
The setting is as follows:
Press 1x: light is on
Press 2x: lighting is automatic
Press 3x: light is off
With the "On" or "Off" mode, the rear light can be
manually switched on and off.
Version 21.01
1x = ON
2x = AUTO
3x = OFF
9/35
Advertisement
Table of Contents
