Chapter 1: KC724 IBERT Getting Started Guide
X-Ref Target - Figure 1-18
In Case of RX Bit Errors
If the RX Bit Error Count for any transceiver displays a non-zero value, or to simply reset
the counter, click the respective BERT Reset button
X-Ref Target - Figure 1-19
Figure 1-19: Click the BERT Reset Button to Zero a Non-Zero RX Error Count
If the MGT Link Status shows No Link for one or more transceivers click the respective TX
Reset button followed by BERT Reset
20
Figure 1-18: GTX IBERT Console
www.xilinx.com
(Figure
1-19) to zero the count.
ug931_c1_18_101512
(Figure
1-20).
KC724 IBERT Getting Started Guide
UG931 (v1.0) October 23, 2012
ug931_c1_18_080912