Xilinx KC724 IBERT Getting Started Manual page 16

Chapter 1: KC724 IBERT Getting Started Guide
3.
X-Ref Target - Figure 1-12
4.
5.
16
Launch the ChipScope Pro Analyzer tool. From the menu bar, click Flow→ Launch
(Figure
ChipScope Analyzer
Figure 1-12: Launch Chipscope Analyzer
In the ChipScope Pro analyzer tool click File → Open Project.
When the Project window opens, navigate to the directory where the ChipScope
software project files (.cpj) were extracted. Select kc724_q115.cpj and click Open.
Note:
The .cpj file loads pre-saved project settings for the demonstration including MGT/IBERT
and clock module control parameters. For more information regarding MGT/IBERT settings, refer
to UG029, ChipScope Pro Software Cores.
www.xilinx.com
1-12).
KC724 IBERT Getting Started Guide
UG931_c1_12_100412
UG931 (v1.0) October 23, 2012