Creating The Gtx Ibert Core - Xilinx KC724 IBERT Getting Started Manual

Chapter 1: KC724 IBERT Getting Started Guide

Creating the GTX IBERT Core

Vivado Design Suite is required to rebuild the designs shown here.
This section provides a procedure to create a single Quad GTX IBERT core with integrated
SuperClock-2 controller. The procedure assumes Quad 115 and 12.5 Gb/s line rate, but
cores for any of the GTX Quads with any supported line rate can be created following the
same series of steps.
For more details on generating IBERT cores, refer to UG029, ChipScope Pro Software Cores.
1.
2.
X-Ref Target - Figure 1-21CORE Generator
3.
4.
24
Start the Vivado test application.
In the Vivado window, click the Create New Project icon (highlighted in
Figure 1-21: Initial window, Vivado Design Suite
When the Create a New Vivado Project dialog window opens (not shown), click Next.
When the Project Name dialog window opens, enter a name for the project, select a
project location, and click Next
www.xilinx.com
(Figure 1-22).
KC724 IBERT Getting Started Guide
Figure 1-21).
UG931_c1_21_101512
UG931 (v1.0) October 23, 2012