Xilinx KC724 IBERT Getting Started Manual page 38

Chapter 1: KC724 IBERT Getting Started Guide
18. Target generation will take several minutes. After the status bar disappears, change to
X-Ref Target - Figure 1-35
Figure 1-35: Tcl Console, Change Directory Command Entry
38
the implement directory by entering this command in the Tcl Console
cd C:/vivado_work/project_1/project_1.srcs/sources_1/ip/chipsco
pe_ibert_7series_gtx_v2_02_a_0/ibert_k7_q115/implement/
Note:
The parent project directory location in this example is C:/vivado_work (the parent
project directory location is determined in
www.xilinx.com
step 4, page 24).
KC724 IBERT Getting Started Guide
UG931 (v1.0) October 23, 2012
(Figure 1-35):
UG931_c1_35_100812