Xilinx KC724 IBERT Getting Started Manual page 36

Chapter 1: KC724 IBERT Getting Started Guide
16. When the Customize IP status bar no longer appears on screen, select the XCO file
X-Ref Target - Figure 1-33
17. When the Manage Outputs dialog window appears, leave the settings as is as shown in
36
under Design Sources within the Sources pane of the Project Manager window,
right-click the XCO file and select Generate Output Products
Figure 1-33: Generate XCO File
Figure 1-34, and then click OK.
www.xilinx.com
(Figure 1-33).
UG931_c1_33_100812
KC724 IBERT Getting Started Guide
UG931 (v1.0) October 23, 2012