Removing/Activating Write Protection - Palas Fidas 200 Series Operating Manual

5 Operation and settings
64
5.4

Removing/activating write protection

To protect the measurement network, the operating system is read-only. To
be able to change the system settings (e.g. date, time or brightness), the
write protection has to be canceled.
Removing write protection
1. Close the firmware but do not close Windows ("Closing the firmware
but not Windows [} 63]").
2. Start the batch file by double-clicking desktop > startup > Fidas
> systemprotection_disable.bat.
ð The Windows terminal opens and the batch file is run.
3. Touch any key to close the terminal.
4. Restart the operating system.
ð Write protection is now removed and the system settings can be
changed permanently.
Activating write protection
Once the system settings have been changed, write protection has to be ac-
tivated again.
1. Start the batch file by double-clicking desktop > startup > Fidas
> systemprotection_enable.bat.
ð The Windows terminal opens and the batch file is run.
2. Touch any key to close the terminal.
3. Restart the operating system.
ð Your system is read-only.
5200-en_V2.0_06/20