Setting Up And Connecting Fidas 200 S - Palas Fidas 200 Series Operating Manual

4 Initial commissioning
32
4.4

Setting up and connecting Fidas 200 S

Mounting material for weather station and sampling tube
The sampling tube and the weather station support tube are connected to
the weatherproof housing with screw connections. The weatherproof hous-
ing is equipped with threaded fittings.
If any of the threaded fittings have been removed from the weatherproof
housing, they must first be screwed on again. Be sure to install the seals as
well. If a seal is not in place, moisture can penetrate the housing and dam-
age the controller.
Components for the mounting set:
1 2
Mounting set for connecting tubes to weatherproof housing
1 Union nut
3 Clamping ring
5 Sealing ring for threaded fitting
7 Sealing ring for lock nut
3 4 5
2 Seal for clamping ring
4 Threaded fitting
6 Lock nut for interior
6 7
5200-en_V2.0_06/20