Palas Fidas 200 Series Operating Manual page 36

4 Initial commissioning
36
Inserting sampling tube in weatherproof housing
Inserting sampling tube in weatherproof housing
1. Release the union nut and remove it along with the clamping ring and
the sealing ring on the clamping ring.
2. Slide the clamping ring with the sealing ring over the sampling tube.
3. Guide the cable from the drying section IADS into the opening in the
weatherproof housing.
4. Carefully insert the sampling tube into the opening. Work carefully to
avoid damaging the cable.
5200-en_V2.0_06/20