Palas Fidas 200 Series Operating Manual page 41

Button Description
Shows the course of the measured PM fractions and
data
the concentrations.
Shows the course of the fine dust values measured.
dust chart
Shows the course of the values measured by the
air sensor
weather station.
chart
Shows the menu for accessories as well as additional
accessories
information (IADS, weather station, filter system, parti-
cle size distribution, PM values, set alarm, calibrate
weather station).
Data transfer from the internal memory to an external
datalogger
storage medium (e.g. flash drive).
• Continuous monitoring of calibration.
settings/cali-
• Switch on and off calibration features.
bration
Provides an overview of critical system parameters
device status
(volume flow, coincidence, pump output, weather sta-
tion, IADS, calibration, LED temperature and operat-
ing mode.
Changes to expert mode.
expert user
menu
This mode is password-protected.
Shuts down the device and the operating system.
shut down
Returns to the main menu from the various menus.
menu
Device status.
device ready
device ready The device is ready for operation.
or
check device status: System parameters have
check device
to be checked.
status
5200-en_V2.0_06/20
5 Operation and settings
Additional information
Data screen – current mea-
sured values [} 42]
Dust chart screen – course of
fine dust values measured
[} 43]
Air sensor chart screen –
course of values measured by
weather station [} 44]
Accessories screen – acces-
sories and other information
[} 45]
Datalogger screen – measured
data [} 54]
Settings/calibration screen
[} 56]
Device status screen [} 58]
Expert mode [} 61]
Completely switching off de-
vice [} 63]
-
Device status screen [} 58]
41