Product Description; Use; Intended Use; Improper Use - Palas Fidas 200 Series Operating Manual

5200-en_V2.0_06/20
3

Product description

3.1

Use

3.1.1

Intended use

The device is manufactured and tested according to good engineering prac-
tices and the recognized safety rules. In order to avoid hazards to yourself or
third parties and damage to the device and other assets, only use the device
properly and as intended.
The device is intended to be used only for measuring fine dust.
Measurable fine dust fractions: PM
Countable particle sizes within the certified range: 0.18 - 18 µm.
The potential range of the device is a factor of the respective model:
Fidas 200 and Fidas 200 E: The device is intended to be installed in a
weatherproof and air conditioned (+5°C to +40°C) measurement station.
Fidas 200 S: The device can be set up outdoors.
The sampling tube and the weather station have to be secured to suitable
structures.
The device is intended to be used only by the following persons:
• Persons who are familiar with activities in the field of particle measuring
technology based on their education or experience.
Any use other than the intended use is prohibited. The manufacturer as-
sumes no liability for damages resulting from this. All warranty claims are
voided if changes are made to the device, including in the course of assem-
bly and installation.
All corresponding documentation must be observed for any work on the de-
vice.
3.1.2

Improper use

The device is not intended for use by the following persons:
• Persons with limited physical, sensory or mental abilities
• Persons lacking the required qualification, experience or knowledge
• Persons under 18 years of age
The manufacturer or supplier will not be liable for damage resulting from im-
proper use.
3 Product description
, PM , PM and PM .
1 2,5 4 10
11