Palas Fidas 200 Series Operating Manual page 34

4 Initial commissioning
34
Positioning and connecting weather station
1. Place the weather station on the protective sleeve.
2. Tighten the nuts slightly (with open-end wrench, size 13). You should
still be able to turn the weather station.
3. Only for WS500 and WS600: Turn the weather station to face north.
4. Tighten the two screws alternately until the weather station can no
longer be turned.
Do not overtighten! The weather station bracket can break.
5. Connect the cable to the weather station.
5200-en_V2.0_06/20