Setting Up And Connecting Fidas 200 E - Palas Fidas 200 Series Operating Manual

4 Initial commissioning
30
4.3

Setting up and connecting Fidas 200 E

Setting up controller and sensor unit
1 2
Hose connections and cable connections between controller and sensor unit
1 Aerosol hose
3 Power supply cable
1. Set up the controller and the sensor unit in a suitable place within the
measuring station.
2. Plug the weather station cable into the receptacle "weather station" on
the back of the controller.
3. Connect the LAN cable to the external sensor unit and the controller.
4. Connect the power supply cable to the external sensor unit and the con-
troller.
5. Connect the aerosol hose to the external sensor unit and the controller.
6. To connect to a network: Connect a network cable.
7. Connect the network cable but do not switch it on yet.
3 3
2 LAN cable
1
2
5200-en_V2.0_06/20