Environmental Conditions; Type Plate - Palas Fidas 200 Series Operating Manual

3 Product description
Data processing
Firmware
20
The compiled data is processed in the controller and saved. The device can
be integrated into a higher ranking measurement system via the interfaces
(RS-232 and Ethernet).
The measured data can also be transferred via the USB port to an external
data medium. The data can then be analyzed or processed with the external
device. The software PDAnalyze should be used to process the data with an
external device. PDAnalyze is included in delivery.
The device is operated via a touch screen. The touch screen shows the user
interface of the firmware Fidas. The firmware Fidas runs on the operating
system Windows Embedded for Point of Service (WEPOS).
3.5

Environmental conditions

Environmental conditions affect the functionality of the device.
The following environmental conditions apply for the operation and storage
of the device:
• Temperature range for Fidas 200 and Fidas 200 E:
+5°C to +40°C
Temperature range for Fidas 200 S:
-20°C to +50°C
• Relative humidity: non-condensing, meaning that moisture in the air is
not permitted to condense as water on or in the device
• Air pressure: atmospheric pressure
Operation and storage under other environmental conditions, for instance in
corrosive or explosive environments, powerful electrical or electromagnetic
fields, areas with ionizing radiation or areas subject to shocks and vibrations
are prohibited.
3.6

Type plate

1
Type plate
1 Product designation
3 Manufacturer with address
2
2 Serial number
3
5200-en_V2.0_06/20