Software Verification Test - Xerox B215 User Manual

Software Verification Test

You can test the printer software to confirm that it is operating correctly. The test checks software files
to confirm that they are not corrupt. If the printer software appears to function improperly, a Xerox
representative can ask you to perform this test.
1. In Xerox CentreWare
®
2. Click Software Verification Test.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to
3. To begin the test, click Start Test.
To interrupt and cancel the test, click Cancel.
4.
5. A message displays to indicate the results of the test. Click Close.
Note:
• You can continue to use the device while the test is running.
• If the test fails, the software files are corrupt. It is recommended that you reinstall the
software. For help, contact a Xerox representative.
Internet Services, click Properties
®
Accessing the Xerox CentreWare
®
Software Verification Test
Security.

Internet Services Administrator
®
Xerox B215 Multifunction Printer
®
Account.
267
User Guide