Xerox B215 User Manual page 100

Incoming Fax Defaults
At the printer control panel, Device
1.
2. Touch Incoming Fax Defaults.
3. Select the settings required:
Feature
Call Receive Mode
Automatic Answer Delay
Receive Footer
Fax Card Volume
Duplex
Junk Fax Prevention
Reduction Control
4. Touch X.
5. To return to the home screen, press the Home button.
App Defaults

Description
When the device receives an incoming fax call, you can select for the device
to answer Immediately, or switch Off automatic answering to allow a user
to manually receive the fax. This option is useful if you have a shared
telephone line for calls and faxes.
You can set the device to delay answering the fax call for a specified
number of rings. Enable the feature, then enter the number of rings the
device waits before answering using the touch screen keypad. This option is
useful if you have a shared telephone line for calls and faxes.
Use this feature to enable fax reception information to be printed at the
bottom of the page.
Use this option to change the sound volume for the incoming ring tone,
transmission tones and the dial tone. Select Off to mute the sound, or Low,
Medium or High to adjust the volume.
Enable this option to print incoming faxes 2-sided automatically.
If this option is enabled, only fax numbers added to the Junk Fax list can be
received. Enable the option, then touch + to add a fax number. Enter the
fax number using the touch screen keypad, then touch  Confirm.
Select the option for how the printer handles faxes too large to print on the
paper available. Select Reduce to Fit to reduce the image, or Discard
Bottom to crop the image at the bottom of the page.
Fax Setup.

Xerox B215 Multifunction Printer
®
Setting Up the Services
100
User Guide