Xerox B215 User Manual page 185

2. To accommodate longer paper, press the paper tray
extender lever (1) and slide the lever to the desired
position. Press and slide the paper length guide (2) until
it lightly touches the end of the paper stack.
3. Position the width guide by pressing the lever and sliding
it towards the stack of paper, until it gently touches the
side of the stack.
4. Insert the paper tray into the printer.
5. After loading paper, if prompted, verify the paper size
and type settings on the screen. To keep the same
settings, touch No. To change the settings, touch Yes,
then adjust the settings:
• To select a paper size, touch Paper Size, then select
a size.
• To select a paper type, touch the Paper Type, then
select a paper type.
• To enable or disable the tray confirmation screen, touch Tray Confirmation, then select an
option.
To save the settings, touch Confirm.
6. When printing from your computer, ensure you select the Paper option in the print driver to
specify the correct paper size and type. Not confirming the paper details may result in printing
delays. For information about setting the paper type and size on the control panel, refer to
Paper Size and Type.
Note: The settings made from the print driver on your computer override the settings on the
control panel.
2
Xerox B215 Multifunction Printer
®
User Guide
Loading Paper
1
Setting
185