Xerox B215 User Manual page 217

Printer Makes Unusual Noises
Probable Causes
There is an obstruction or debris inside
the printer.
Condensation has Formed Inside the Printer
Moisture can condense inside a printer when the humidity is above 85% or when a cold printer is in a
warm room. Condensation can form in a printer after it has been sitting in a cold room that is heated
quickly.
Probable Causes
The printer has been sitting in a cold
room.
The relative humidity of the room is too
high.
Solutions
1. Power off the printer.
2. Remove the obstruction or debris.
Note: If you cannot remove the obstruction or debris, contact a
service representative
Solutions
• Before operating the printer, allow it to acclimate for several
hours.
• Allow the printer to operate for several hours at room
temperature.
• Reduce the humidity in the room.
• Move the printer to a location where the temperature and
relative humidity are within the operating specifications. For
details, refer to Environmental
General Troubleshooting
Specifications.
Xerox B215 Multifunction Printer
®
User Guide
217