Table of Contents
Advertisement
TLE92108 APPKIT
8 APPKIT setup
•
Configure gate driver timings (cross-current-protection and blank time), hold and static currents.
•
Configure DS overvoltage.
•
Map gate drive timings and static currents to half-bridge.
PWM and Diagnostic
In this panel it is possible to:
•
Enable adaptive MOSFET control, set filter, enable generator mode detection or deep adaption.
•
Set dis/charge currents for active and free-wheeling MOSFET, configure adaptive currents, set target turn-
on delay and pre dis/charge time for PWM channel 1-3.
•
Read PWM switching characteristics.
•
Check Global Status Byte, General Status register, PWM mapping error and drain-source overvoltage.
User Manual
14
v1.0
2020-06-30
Advertisement
Table of Contents
Need help?
Do you have a question about the TLE92108 APPKIT and is the answer not in the manual?