Power Supply For Ac Voltage (Up To 30 Vac) Or Dc Voltage Above 31.2 V (Up To 48 Vdc); Figure 12: Power Supply For Ac Voltage Ranges Or Dc Voltages; Table 19: Legend For Figure "Power Supply For Ac Voltage Ranges Or - WAGO 750-527 Manual

WAGO-I/O-SYSTEM 750
750-527 4DO 30V AC/DC 2.0A SSR
6.2.2 Power Supply for AC Voltage (up to 30 VAC) or DC Voltage
above 31.2 V (up to 48 VDC)
The field-side supply ( load voltage) 750-527 I/O Module for AC voltage ranges
(up to 30 VAC) or DC voltage above 31.2 VDC must be supplied by, e.g., through
supply module 0 to 230 VAC/VDC (750-612). No head stations (coupler power
supply) or bus power supplies are specified for these voltages.
The I/O Module (750-527) receives its field voltage via the power jumper
contacts.
Figure 12: Power Supply for AC Voltage Ranges or DC Voltages above 31.2 VDC
Table 19: Legend for Figure "Power Supply for AC Voltage Ranges or DC Voltages above 31.2 VDC"
Pos.
1
2
3
4
5
6
7
U
S
U
F1
U
F2
U
F3
Explanation
Head station
I/O Modules (24 VDC; e.g., 750-430 or 750-530)
Supply Module, 0 to 230 VAC/VDC (750-612)
750-527 I/O Module (voltage range > 31.2 VAC/VDC)
Supply Module 24 VDC
(e.g., 750-613, 750-601 or 750-610)
I/O Modules (24 VDC; e.g., 750-430 or 750-530)
End Module: (750-600)
System power supply 24 VDC
Field power supply 24 VDC
Field power supply (0 ... 30 VAC or 0 ... 48 VDC)
Field power supply 24 VDC
Connect Devices 35
Manual
Version 1.0.0