Technical Condition Of Specified Devices - WAGO 750-527 Manual

10 Important Notes
The operation of the product in residential areas without further measures is only
permitted if the product complies with the emission limits (interference emissions)
according to EN 61000-6-3.
Operating the product in home applications without further measures is only
permitted if it meets the emission limits (emissions of interference) according to
EN 61000-6-3.
You will find the relevant information in the section "Device Description" >
"Standards and Guidelines" in the manual for the used fieldbus coupler/controller.
Appropriate housing (per 2014/34/EU) is required when operating the
WAGO-I/O-SYSTEM 750 in hazardous environments. Please note that a
prototype test certificate must be obtained that confirms the correct installation of
the system in a housing or switch cabinet.
The implementation of safety functions such as EMERGENCY STOP or safety
door monitoring must only be performed by the F I/O modules within the modular
WAGO-I/O-SYSTEM 750. Only these safe F I/O modules ensure functional
safety in accordance with the latest international standards. WAGO's
interference-free output modules can be controlled by the safety function.
2.1.4

Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
• Repairs,
• Changes to the hardware or software that are not described in the
operating instructions,
• Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO Kontakttechnik GmbH & Co. KG.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-527 4DO 30V AC/DC 2.0A SSR