Installing The Gu-Ra Gps Antenna - Alvarion BreezeACCESS II System Manual

IF Based Equipment

Installing the GU-RA GPS Antenna

1. Screw the GPS antenna firmly to the special 1" threaded pole.
2. Use the mounting kit supplied with the unit (or any other suitable means)
to secure the GPS antenna pole to an existing pole (e.g. any pole used for
mounting base station antennas or the outdoor units of the BreezeACCESS
Access Units). Choose the location to ensure an obstacle-free line of sight
from the GPS antenna to the sky, extending at least 30 degrees in all
directions.
3. Secure the GPS cable to the mounting pole, leaving a free length of cable
(with the 12-pin round connector at the end) sufficient for connecting to the
antenna module.
WARNING:
The cable is very heavy and connecting it to the antenna without first securing it to the
pole may damage the connector.
Figure 1-14: GPS Installation
BreezeACCESS Version 4.3 System Manual
1-23