Alvarion BreezeACCESS II System Manual page 284

C-36
IP Parameters
MIB Parameter
(Location in
Parenthesis)
*IpParams
710.3.3. 11
(brzAccessMib 11)
*UnitIpAddress
710.3.3. 11.1
(*IpParams 1)
*SubNetMask
710.3.3. 11.2
(*IpParams 2)
*DefaultGWAddress
710.3.3. 11.3
(*IpParams 3)
*UseDhcp
710.3.3. 11.4
(*IpParams 4)
*RunIPaddr
710.3.3. 11.5
(*IpParams 5)
*RunSubNetMask
710.3.3. 11.6
(*IpParams 6)
*RunDefaultIPGateway
710.3.3. 11.7
(*IpParams 7)
*AccessToDHCP
710.3.3. 11.8
(*IpParams 8)
System Information Parameters
MIB Parameter
(Location in Parenthesis)
*SysInfo
710.3.3. 13 (brzAccessMib 13)
*UnitHwVersion
710.3.3. 13.1
(*SysInfo 1)
*VoiceHwVersion
710.3.3. 13.2
(*SysInfo 2)
*SoftwareVersion
710.3.3. 13.3
(*SysInfo 3)
*ShadowVersion
710.3.3. 13.4
(*SysInfo 4)
*SupportedMibVersion
710.3.3. 13.5
(*SysInfo 5)
*UnitMacAddress
710.3.3. 13.6
(*SysInfo 6)
Manual Revision: 3.0
Description
Applicable to all products. IP address of the unit.
Applicable to all products. Subnet mask of the unit.
Applicable to all products. Default gateway IP address of the
unit.
Applicable to all products. DHCP client mode of operation.
disabled: Use regular (manual) methods to configure IP
parameters.
dHCP Only: Use DHCP server to configure IP parameters.
automatic: Use DHCP server to configure IP parameters. If a
DHCP server is not available, use configured values for
*UnitIpAddress, *SubNetMask and *DefaultGWAddress.
Applicable to all products. Read-only: The run-time IP
address. If DHCP is used the Run Time IP Address is the
address given to the unit by the server. Otherwise it is the
manualy configured address.
Applicable to all products. Read-only: The run-time Subnet
Mask. If DHCP is used the Run Time Subnet Mask is the
mask given to the unit by the server. Otherwise it is the
manualy configured mask.
Applicable to all products. Read-only: The run-time Gateway
IP address. If DHCP is used the Run Time Gateway IP
Address is the address given to the unit by the server.
Otherwise it is the manualy configured address.
Applicable to all products. The port to be used for
communicating with a DHCP server. (In GU only the
fromEthernetOnly option is available).
Applicable to all products. Read-only:
Hardware platform version.
Applicable only to SU with voice. Read-only:
Voice hardware platform version.
Applicable to all products. Read-only: Running
software version.
Applicable to all products. Read-only: Shadow
software version.
Applicable to all products. Read-only: The
supported private MIB versions.
Applicable to all products. Read-only, Unit
hardware MAC address.
BreezeACCESS Version 4.3 System Manual
IP address
IP address
IP address
Integer
disable (0)
dHCPOnly (1)
automatic (2)
IP address
IP address
IP address
Integer
fromWlanOnly(0)
fromEthernetOnly(1)
fromBoth(2)
Description
Values/Range
Values/Range
DisplayString
(SIZE(0..32))
DisplayString
(SIZE(0..32))
DisplayString
(SIZE(0..32))
DisplayString
(SIZE(0..32))
DisplayString
(SIZE(0..32))
MAC address