The Bs-Au - Alvarion BreezeACCESS II System Manual

1-18
WARNING:
If two power supply modules are used in the same chassis for redundancy, both power
supplies must be of the same type. Do not use a mix of AC and DC power supply
modules in the same chassis.

The BS-AU

Name
PWR Power supply
12 VDC
WLNK Wireless link activity
ALRM Alarm
MASTER Master unit
Manual Revision: 3.0
Figure 1-12: BS-AU Front Panel
Table 1-9: BS-AU LEDs
Description
On – After successful power up, indicating that
12 VDC is supplied to the outdoor unit.
Off – Power off or DC/DC converter failure
(12 VDC not supplied to the outdoor unit)
Blinking – Receiving packets from the
wireless media
Off – No reception of packets from the
wireless media
On – Loss of hopping synchronization (in
Slave mode)
On – The unit is configured as Master
BreezeACCESS Version 4.3 Installation
Functionality