Supported Traps - Alvarion BreezeACCESS II System Manual

C-44
MIB Parameter
(Location in Parenthesis)
*MinimumFlashDetectTimeOut
710.3.4.3.3.1
(*TimeOuts 1)
*MaximumFlashDetectTimeOut
710.3.4.3.3.2
(*TimeOuts 2)
*DisconnectTimeOut
710.3.4.3.3.3
(*TimeOuts 3)
*InterDigitTimeOut
710.3.4.3.3.4
(*TimeOuts 4)
*CalledPartyReleaseTimeOut
710.3.4.3.3.5
(*TimeOuts 5)
General Info MIB
MIB Parameter
(Location in Parenthesis)
*GenInfo 710.3.4.9
(breezecomPrvRev 9)
brzHoppingStandardProtected

Supported Traps

Note: * is used instead of the brzacc prefix
Trap Associated Parameters
MIB Parameter
(Location in Parenthesis)
*Traps
710.3.3.14
(brzAccessMib 14)
*TrapSUMacAddr
710.3.3.14.1
(*Traps 1)
*TrapRssiQuality
710.3.3.14.2
(*Traps 2)
*TrapLastRssiQuality
710.3.3.14.3
(*Traps 3)
*TrapText
710.3.3.14.4
(*Traps 4)
Manual Revision: 3.0
Description
The minimum on-hook time for identifying it
as a Hook Flash.
The maximum on-hook time for identifying
it as a Hook Flash.
The minimum time for decision on an on-
hook (disconnect) condition.
Applicable only for pulse dialing. The
minimum time between two consecutive
pulses to be considered as separating
between two digits.
The minimum time for an on-hook signal on
the called party side to be considered as
call disconnect.
Description
General Info MIB
Applicable to AU and SU in
BreezeACCESS II family. Read-only.
Indicates if the Hopping Standard (Band)
can be changed (if protected or not).
Description
Applicable to AU only. SU MAC address.
Applicable to SU only. RSSI level of the received signal.
Applicable to SU only. RSSI level of the received signal
from the last AU with which the SU was associated.
Textual string for future use.
BreezeACCESS Version 4.3 System Manual
Values
Integer
0-2,000 (milliseconds)
Integer
0-2,000 (milliseconds)
Integer
0-2,000 (milliseconds)
Integer
0-2,000 (milliseconds)
Integer
0-10,000 (milliseconds)
Values
Integer
notProtected (1)
protected (2)
Values
MAC address
Integer
Integer
DisplayString