Alvarion BreezeACCESS II System Manual page 291

Appendix C
Telephony Signals
MIB Parameter
(Location in Parenthesis)
*TelephonySignals
710.3.4.3
(brzPhonMib 3)
*TelephonyCountryStandard
710.3.4.3.1
(*TelephonySignals 1)
*TonesTable
710.3.4.3.2
(*TelephonySignals 2)
*TonesEntry
710.3.4.3.2.1
(**TonesTable 1)
*TonesIdx
710.3.4.3.2.1.1
(*TonesEntry 1)
*ToneName
710.3.4.3.2.1.2
(*TonesEntry 2)
*Freq1
710.3.4.3.2.1.3
(*TonesEntry 3)
*Freq2
710.3.4.3.2.1.4
(*TonesEntry 4)
*Level1
710.3.4.3.2.1.5
(*TonesEntry 5)
*Level2
710.3.4.3.2.1.6
(*TonesEntry 6)
*CadenceOn
710.3.4.3.2.1.7
(*TonesEntry 7)
*CadenceOff
710.3.4.3.2.1.8
(*TonesEntry 8)
*Duration
710.3.4.3.2.1.9
(*TonesEntry 9)
*TimeOuts
710.3.4.3.3
(*TelephonySignals 3)
Description
The country standard for call progress
tones, ringer and timeouts.
A table of parameters of the tones. If the
*TelephonyCountryStandard is set to
proprietary, the tones parameters may be
configured (read/write). For all other
country standards, the values are read-
only. Not accessible.
A table entry in the Tones Table. Not
accessible.
An index to the Tones Table indicating the
tone type. Read-only.
The name of the tone.
One of the two frequencies that can be
used for generating the tone. Serves as the
Ringer Frequency for Tone 6 (Ring
Frequency).
If set to 0 – this frequency is not used.
The second frequency that can be used for
generating the tone.
Not Applicable for Ring Frequency (Tone 6)
If set to 0 – this frequency is not used.
The level in dBm of the first frequency
(*Freq1).
Not Applicable for Ring Frequency (Tone 6)
The level in dBm of the second frequency
(*Freq2).
Not Applicable for Ring Frequency (Tone 6)
the ringing time (on) in the tones/silence
sequence of the tone.
the silence time (off) in the tones/silence
sequence of the tone.
the maximum duration of transmitting the
tone to the earphone. Tone generation will
cease upon hang-up (upon off-hook for
Tone 6 - Ring Frequency).
Time Out parameters. If the
*TelephonyCountryStandard is set to
proprietary, the Time Out parameters may
be configured (read/write). For all other
country standards, the values are read-
only.
BreezeACCESS Version 4.3 System Manual
C-43
Values
INTEGER
proprietary (1)
germany (2)
sweden (3)
france (4)
unitedKingdom (5)
belgium (6)
usa (7)
chile (8)
na (255)
Integer
1-8
Integer
Dial Tone(1)
Ring Back Tone (2)
Busy Tone (3)
Congestion Tone (4)
Call In Process Tone (5)
Ring Frequency (6)
Error Tone (7)
High Level Error Tone (8)
Integer
0-3000 (Hz)
If Ring Frequency (Tone 6), valid
values are 17, 20, 25, 50 (Hz).
Integer
0-3000 (Hz).
na (255)
Display String
-31 to 3 (dBm). ñ32 is for mute.
Display String
-31 to 3 (dBm). ñ32 is for mute.
Integer
100–10,000 (milliseconds)
Integer
100–10,000 (milliseconds)
Integer
0-10,000 (seconds)
(0 means that the tone is not used).