Bs-Au Leds; Bs-Gu Leds - Alvarion BreezeACCESS II System Manual

4-6

BS-AU LEDs

Name Description
PWR Power supply
12 VDC
WLNK Wireless link
activity
ALRM Alarm
MASTER Master unit

BS-GU LEDs

LED Name
PWR (green)
OK (green)
A1 (red)
A2 (red)
A3 (red)
A4 (red)
A5, A6 (red)
Manual Revision: 3.0
Table 4-6: BS-AU LEDs
On – After successful power up, indicating that 12 VDC is
supplied to the outdoor unit.
Off – Power off or DC/DC converter failure (12 VDC not
supplied to the outdoor unit)
Blinking – Receiving packets from the wireless media
Off – No reception of packets from the wireless media
On – Loss of hopping synchronization (in Slave mode)
On – The unit is configured as Master
Table 4-7: BS-GU LEDs
On – Power supply functioning properly.
Off – Power supply not functioning properly.
On – Proper signals are being received from the GPS antenna.
Off – The GPS antenna is not connected or it is not functioning
properly.
On – Alarm In 1 (external) is activated.
On – Alarm In 2 (external) is activated.
On – Alarm In 3 (external) is activated.
On – Alarm In 4 (external) is activated.
Reserved for future use.
BreezeACCESS Version 4.3 Commissioning
Functionality
Functionality