Alvarion BreezeACCESS II System Manual page 174

BreezeACCESS Version 4.3 Operations and Administration
2-38
parameter is only set in the AU. All the SUs learn it from the AU
during the association process.
The valid values depend on the applicable hopping standard (see
Table ý3-2 on page 31).
The default value is 1.
Hopping Set –Displays the selected hopping set. Each hopping
standard has 3 hopping sets. The Hopping Set selected in this
screen determines which hopping sequences are available in the
Hopping Sequence screen. Always use the same hopping set per site
(with different hopping sequences) to minimize the possibility of
collisions on the wireless media. This parameter is set only in the
AU. All the associated SUs learn its value from the AU during the
association process.
Valid values are from 1 to 3.
The default value is 1.
Manual Revision: 3.0