Magtek eDynamo Programmer's Manual page 61

7 - Notification Messages Sent from Device to Host (Extended Notifications Only)
Offset Field Name
Current
2 Transaction
Progress Indicator
3..4 Final Status
eDynamo| Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
This one-byte field indicates the current processing stage for the
transaction:
0x00 = No transaction in progress
0x01 = Waiting for cardholder to present payment
0x02 = Powering up the card
0x03 = Selecting the application
0x04 = Waiting for user language selection (Contact Only)
0x05 = Waiting for user application selection (Contact Only)
0x06 = Initiating application (Contact Only)
0x07 = Reading application data (Contact Only)
0x08 = Offline data authentication (Contact Only)
0x09 = Process restrictions (Contact Only)
0x0A = Cardholder verification (Contact Only)
0x0B = Terminal risk management (Contact Only)
0x0C = Terminal action analysis (Contact Only)
0x0D = Generating first application cryptogram (Contact Only)
0x0E = Card action analysis (Contact Only)
0x0F = Online processing
0x10 = Waiting online processing response
0x11 = Transaction Complete
0x12 = Transaction Error
0x13 = Transaction Approved
0x14 = Transaction Declined
0x15 = Transaction Cancelled by MSR Swipe (MSR Only)
0x16 = EMV error - Conditions Not Satisfied (Contact Only)
0x17 = EMV error - Card Blocked (Contact Only)
0x18 = Application selection failed (Contact Only)
0x19 = EMV error - Card Not Accepted (Contact Only)
0x1A = Empty Candidate List
0x1B = Application Blocked
TBD
Page 61 of 245 (D998200115-17)
Value