Appendix Eemv Factory Defaults (Emv Only); Emv Common Settings; Emv Common Terminal Settings And Defaults; Emv Common Application Settings And Defaults - Magtek eDynamo Programmer's Manual

Appendix E - EMV Factory Defaults (EMV Only)
Appendix E
E.1

EMV Common Settings

This section lists settings that are common across all EMV databases on the device.
E.1.1 EMV Common Terminal Settings and Defaults
This section lists the default EMV Terminal Settings shared across all terminal databases on the device.
For information about reading and changing these settings, see section 8.5.2 Extended Command
0x0306 - Read Terminal Configuration and section 8.5.1 Extended Command 0x0305 - Modify
Terminal Configuration.
Table 9-8 - EMV Common Terminal Settings
Tag Default Value (Hex)
5F2A 08 40
5F36 02
9F1A 08 40
31 31 32 32 33 33 34
9F1C
34
9F4E 30 30 30 30 30 30 30
DFDF14 00 00 75 30
DFDF15 00 00 00 01
DFDF19 65 6E
65 6E 66 72 69 74 64
DFDF2D
65 65 73
E.1.2 EMV Common Application Settings and Defaults
There are no default EMV Application Settings shared across all application databases on the device.
eDynamo| Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
EMV Factory Defaults (EMV Only)
Max.
Configurable
Length
0x02 MagTek
0x01 MagTek
0x02 MagTek
0x08 MagTek
0x28 MagTek
0x04 MagTek
0x04 MagTek
0x02 MagTek
0x0A Read Only
Page 224 of 245 (D998200115-17)
Tag Description
Transaction Currency Code
Transaction Currency Exponent
Terminal Country Code
Terminal Identification
Merchant Name and Location
Socket Timeout for Online Processing (ms)
Socket Retries (number of connection
retries in Online Processing)
Default Terminal Language (Multi-
Language Only) see Appendix F
Supported Terminal Languages (Multi-
Language Only) see Appendix F