Property 0X34 - Send Aamva Card Data Unmasked (Msr Only) - Magtek eDynamo Programmer's Manual

9 - Properties

9.15 Property 0x34 - Send AAMVA Card Data Unmasked (MSR Only)

0x34
Property ID:
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x00
This property controls how the device sends AAMVA card data when the security level is higher than
Security Level 2:

0 = Send masked AAMVA card data.

1 = Send clear AAMVA card data.
This property is stored in non-volatile memory, so it persists when the device is power cycled. When this
property is changed, the device must be reset (see Command 0x02 - Reset Device) or powered off for at
least 30 seconds, then powered on, before the changes will take effect.
Example Set Request (Hex)
Cmd Num
01
Example Set Response (Hex)
Result Code
00
Example Get Request (Hex)
Cmd Num
00
Example Get Response (Hex)
Result Code
00
eDynamo| Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
Data Len
06
Data Len
00
Data Len
01
Data Len
01
Page 148 of 245 (D998200115-17)
Property ID
34
Data
Property ID
34
Data
01
Data
01 xx xx xx xx
xx xx xx xx is the MAC