Emv Contact Application Settings And Defaults (Contact Only) - Magtek eDynamo Programmer's Manual

Appendix E - EMV Factory Defaults (EMV Only)
E.2.2 EMV Contact Application Settings and Defaults (Contact Only)
This section lists the default EMV Contact Application Settings. For information about reading and
changing these settings, see section 8.5.4 Extended Command 0x0308 - Read Application
Configuration and section 8.5.3 Extended Command 0x0307 - Modify Application Configuration.
Table 9-10 - EMV Contact Application Slot 1 Data
Default Value
Tag
(Hex)
All EMV Common Application Settings and Defaults from section E.1.2
84 A0 00 00 00 25 01 0x10
97 00 00 00
9F01 00 00 00 00 00 01 0x06
9F06 A0 00 00 00 25 01 0x10
9F09 00 01
9F1B 00 00 00 00
9F49 9F 37 04
DFDF23 01
DF8120 00 00 00 00 00
DF8121 00 00 00 00 00
DF8122 00 00 00 00 00
DFDF10 00 00 00 00 00 00 0x06
DFDF11 63
DFDF12 63
DFDF67 01
DFDF68 00
eDynamo| Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
Max.
Configurable
Length
MagTek
0x0F MagTek
MagTek
MagTek
0x02 MagTek
0x04 MagTek
0x0A MagTek
0x01 MagTek
0x05 MagTek
0x05 MagTek
0x05 MagTek
MagTek
0x01 MagTek
0x01 MagTek
0x01 MagTek
0x01 MagTek
Page 229 of 245 (D998200115-17)
Tag Description
Dedicated File (DF) Name
Default TDOL
Acquirer Identifier
Application Identifier (AID) - terminal
Application Version Number
Terminal Floor Limit
Default DDOL
Application Selection Indicator (ASI)
Terminal Action Code - Default
Terminal Action Code - Denial
Terminal Action Code - Online
Threshold Value for Biased Random Selection
Target Percentage to be used for Random
Selection (0 - 63 hex)
Maximum Target Percentage to be used for
Biased Random Selection (0 - 63 hex)
MSR Fallback Supported (Not Supported)
PIN Bypass Supported (Not Supported)