Track 3 Absolute Data Length (Hid | Gatt | Slip, 3-Track Only); Track 1 Encrypted Data; Track 2 Encrypted Data; Track 3 Encrypted Data - Magtek eDynamo Programmer's Manual

6 - Magnetic Stripe Card Data Sent from Device to Host (MSR Only | Keypad Entry Only)

6.7.6 Track 3 Absolute Data Length (HID | GATT | SLIP, 3-Track Only)

This one-byte value indicates the number of usable bytes in the Track 3 Encrypted Data value after
decryption. If the value is 0, the device found no data on the track or encountered an error decoding the
track.
Format
HID
Streaming
TLV
GATT/SLIP

6.7.7 Track 1 Encrypted Data

For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
HID
TLV
GATT/SLIP

6.7.8 Track 2 Encrypted Data

For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
HID
TLV
GATT/SLIP

6.7.9 Track 3 Encrypted Data

On 2-track devices (see Table 1-2 - Device Features), this value is included in incoming data as a null
value.
For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
HID
TLV
GATT/SLIP
eDynamo| Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
Where to Find Value
Usage 0x53
N/A
N/A
Offset 854
Where to Find Value
Usage 0x30
Data Object 8215
Offset 7..118
Where to Find Value
Usage 0x31
Data Object 8216
Offset 119..230
Where to Find Value
Usage 0x32
Data Object 8217
Offset 231...342
Page 46 of 245 (D998200115-17)