ADJ STARTEC BOOM BOX FX2 User Manual page 7

Boom Box FX2
- After setting up, and before public use, test laser to ensure proper function. Do not use if any
defect is detected. Do not use if laser emits only one or two laser beams rather than dozens/
hundreds, as this could indicate damage to the diffraction grating optic, and could allow emission
of higher laser levels above Class 3R.
- Do not point lasers at people or animals. Never look into the laser aperture or laser beams.
- Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled
balconies, etc.
- Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even
laser reflections can be hazardous.
- Never point a laser at aircraft, this is a federal offense.
- Never point un-terminated laser beams into the sky.
- Do not expose the output optic (aperture) to cleaning chemicals.
- Do not use laser if the laser appears to be emitting only one or two beams.
- Do not use the laser if the housing is damaged, the housing is open, or if the optics appear
damaged in any way.
- Never open the laser housing. The high laser power levels inside of the protective housing can start
fires, burn skin and will cause instant eye injury.
- Never leave this device running unattended.
- The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and
well-trained operator, familiar with the data included in this manual.
- The legal requirements for using laser entertainment products vary from country to country. The
user is responsible for the legal require-ments at the location/country of use.
- Always use proper lighting safety cables when hanging lights and effects overhead.
ADJ Products, LLC - www.adj.com - Boom Box FX2 User Manual Page 7
Laser Warnings and Safety