ADJ STARTEC BOOM BOX FX2 User Manual page 14

Boom Box FX2
System Menu: When making adjustments press ENTER to confirm your setup then press and
hold the MENU button for at least 3 seconds. To exit without making any adjustments press
the MENU button. The display will lock after 30 seconds, press the MENU button for 3 sec-
onds to unlock.
ADDR - DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until "ADDR" is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find
your desired address. Press ENTER to set your desired DMX address.
CHND - This will let select your desired DMX channel mode.
1. Press the MENU button until "CHND" is displayed, press ENTER. The current DMX channel
mode will be displayed.
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to
confim and exit.
SCND - This will let you configure your unit in primary mode or secondary mode.
1. Press the MENU button until "SCND" is displayed, press ENTER. Either "Pr1", "Sec 1", or
"Sec 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, press ENTER to confim.
NOTE: In a Primary/Secondary configuration you can set one fixture to Primary and then set the
next fixture to "Sec 2", the fixtures will now have contrast movement to each other.
SHND - Show modes 0-9 (Factory programs).
1. Press the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between 0-6. Shows 1-6 are factory
programs, while show "0" is random mode. Use the UP or DOWN buttons to find your desired
show.
3. When you have found your desired show press ENTER, then press and hold the MENU button for
at least 3 seconds to activate. After you have set your desired show, it can be changed at any
time using the UP or DOWN buttons.
SOUN - Sound Active mode.
1. Press the MENU button until "SOUN" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to
activate sound active mode, or "OFF" to deactivate sound active mode.
3. Press ENTER to confirm.
SENS - In this mode you can adjust the sound sensitivity.
1. Press the MENU button until "SENS" is displayed, press ENTER.
2. A number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust the sound
sensitivity, with 0 being the least sensitive, and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to confirm.
ADJ Products, LLC - www.adj.com - Boom Box FX2 User Manual Page 14
System Menu