Table of Contents
Advertisement
4-5. ADA-61 Board (BKMA-513) Adjustment
7. Repeat step 6 until the specifications are satisfied.
Specifications : A = 714 ± 7 mV (100 ± 1 IRE) :525/60 mode
A = 700 ± 7 mV:
A
8. Save the set value by clicking "Write to EEPROM" of the ADjuster2.
4-5-6. Setting upon Completion of Adjustment
1. Set the R1 port and P1 (or P2, P3) port of the MAV-555A to the STOP mode.
2. Select "File" _ "Disconnect" on the top menu of the ADjuster2.
3. Quit the ADjuster2.
4. Return the setting of "782-INT VD SG" on the setup menu to the original setting before starting the adjust-
ment.
5. Return the switch setting of VIDEO PROCESS block on the meter panel to the original setting before
starting the adjustment.
6. Turn off the main power of the MAV-555A.
4-16 (E)
625/50 mode
MAV-555A
Advertisement
Table of Contents
