1-1. Error Message
1-1-2. Error Indication
If an error is detected during boot-up, the error message
"EM Board Not Respond" appears on the front panel. If
this message appears, reboot the MAV-555A. If the same
error message appears again, check the 8-bit LED on the
following boards.
Board Name Indication
DM-127
FM-81
(TM block)
EM-3
1-2 (E)
Error contents
FPGA Config Error
SDI Encoder Reset Error
DM1 Communication Error
DM2 Communication Error
FM Communication Error
EM Communication Error
Dual Port Memory Read/
Write Inspection Error
OS Resource Generation
Error
Initialize Timeout Error
Video/Audio-Router
Initialization Error
MAV-555A