Table of Contents
Advertisement
8. Remove the four screws. Remove the slider (LH)
assembly and the slider (RH) assembly.
9. Remove the two screw and remove the ground plate
(A) and the ground plate (B).
Slider (LH) assembly
B3 x 6
B3 x 6
Ground plate (A)
B3 x 6
Slider (RH) assembly
10. Remove the two screws and remove the two slider guides.
11. Remove the 11 screws and remove the front frame
lower assembly.
12. Remove the four screws and remove the front upper
assembly.
Front upper assembly
B3 x 6
B3 x 6
Slider guide
B3 x 6
B3 x 6
B3 x 6
B3 x 6
Slider guide
MAV-555A
B3 x 6
Ground plate (B)
B3 x 6
B3 x 6
Front frame lower
assembly
13. Raise the board lever in the direction of arrow A and
pull out the IF-837 board in the direction of arrow B.
14. Pull out the FP-128 board in the direction of arrow C.
IF-837 board
Board lever
A
C
15. Remove the 10 screws (B2.6 x 6) and the 12 screws
(BVTT3 x 8). Remove the slot assembly in the
direction of the arrow.
BVTT3 x 8
B2.6 x 6
Slot assembly
3-5. Replacing the Boards
B
A
Board lever
FP-128 board
BVTT3 x 8
3-15 (E)
Advertisement
Table of Contents
