Table of Contents
Advertisement
In the case of installing the software module from other PC through network
Log in with the authority of user: setup and instal the software module as follows.
1. Enter the login name [rsetup].
2. Enter the password [rsetup].
3. Enter the password [setup].
4. The Setup menu appears.
FreeBSD/i386 (gw176) (ttyd0)
login: rsetup"
Password: rsetup"
Last login: Thu Oct 11 11:07:03 from 43.0.181.101
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE (G2X) #5: Wed Sep 26 10:04:15 JST 2001
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
. Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA
section for your release first as it's updated frequently.
. The Handbook and FAQ documents are at http://www.freebsd.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search.html. If the doc distribution has
been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
'uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
man page. If you are not familiar with man pages, type "man man".
You may also use '/stand/sysinstall' to re-enter the installation and
configuration utility. Edit /etc/motd to change this login announcement.
Password: setup"
5. Select [5 Install] from the menu and press the [ENTER] key.
G2xSetup (Ver.1.10) (Mon Oct 22 14:54:24 CDT 2002)
1 Setup
2 Log
3 Monitor
4 Admin
5 Install
R Reboot
S Shutdown : system shutdown
e Exit
MAV-555A
: setup system setting
: log and status management
: monitor IO status
: administrator control
: software installation (version up)
: system reboot
: exit setup
[ OK ]
Cancel
1-4. Upgrading the Software
1-19 (E)
Advertisement
Table of Contents
