Table of Contents
Advertisement
Installation
Install the new CN-1830 board by reversing the steps of
removal.
n
Align the dowels of the slot assembly with the hole of the
MB-947 assembly.
Fasten the 10 screws A (B2.6 x 6) and fasten the 12
screws B (BVTT3 x 8).
BVTT3 x 8
B
B2.6 x 6
A
Dowel
Slot assembly
Dowel
MAV-555A
Hole
B
MB-947
assembly
BVTT3 x 8
Hole
3-5-7. MB-947 Board
Removal
1. Remove the ornamental bar, ornamental plate and the
blank panel. (Refer to Section 3-2-1.)
2. Remove the top plates. (Refer to Section 3-2-2.)
3. Remove the all HDD unit. (Refer to Section 3-4-5.)
4. Remove the front assembly. (Refer to Section 3-4-6.)
5. Remove the CN-1830 board. (Refer to Section 3-5-6.)
6. Remove the nine screws and remove the MB-947
board from the bracket.
PSW3 x 6
Installation
Install the new MB-947 board by reversing the steps of
removal.
3-5. Replacing the Boards
Bracket
MB-947 board
3-17 (E)
Advertisement
Table of Contents
