Operation And Control; Personnel Qualification - Important Information For The Operator; Safety Instructions; Description Of The Control Elements - GEA RedGenium Operating Instruction

Operation and control

Personnel qualification - Important information for the operator

8 Operation and control
8.1 Personnel qualification - Important information for the operator
The product must be only be operated by trained and qualified personnel who are
familiar with the contents of the operating manual for GEA products.
The safety regulations for GEA products must always be correctly complied with
in order to prevent injury of the operating personnel and damage to the product.
8.2

Safety Instructions

Dangerous situations during operation can be avoided by safety-conscious and
forward-looking conduct of the personnel.
The following principles apply during operation:
•
•
•
•
•
•
•
8.3

Description of the control elements

8.3.1

Requirements for switching on

The product has been designed for automatic operation; the control controls the
switching of the compressor and its capacity adjustment.
There is no need for constant adjustment and observation of the product in auto-
matic operation. The necessary steps for switching on the product are given in
the documentation of the control.
If the product is controlled manually, it must be operated from the refrigerator
room. In particular, the repair and maintenance instructions must be complied
with.
The following prerequisites must be fulfilled for switching on the product:
88
Notice
The product is operated via the control panel of the control unit.
► If the control unit is contained in the scope of delivery (standard), the op-
erating personnel must have knowledge of the contents of the complete
documentation for the control.
► The control documentation is part of the product documentation.
Monitor the product during operation.
Safety devices must not be changed, removed or decommissioned. Check
the safety devices at regular intervals.
All covers and hoods must be mounted as intended.
The installation location of the product must always be sufficiently ventilated.
Design modifications to the product are not permissible. Immediately report
any changes to the product to the responsible person.
The danger areas must always be kept clear. Do not position any objects in
the danger area.
Check the proper functioning of all of the EMERGENCY OFF equipment at
regular intervals.
L_151511_2
19.12.2019